Motion Pro CR Competition Throttle Tube Kit - 190deg Turn

Motion Pro CR Competition Throttle Tube Kit (190deg Turn)

At Motion Pro, we never refer to our throttles by fractional names (1/4-turn, 1/2-turn or other any other "turns"). How far a throttle fractionally turns is a function of the throttle's "rate" (how much cable inner wire the throttle's drum or cam reels in, versus how far in degrees the tube must be turned to reel it in) and the carb's/throttle body's travel (how much cable inner wire must be reeled in to fully open the carb(s) or throttle body(ies)).

Motion Pro CR Competition Throttle Tube Kit

• As an example, our fastest throttle, the Vortex, has a rate of 1.90 (the maximum number of degrees turned divided by the maximum travel in mm, 95º/50mm of wire travel). Since it has a maximum of 95º to turn, it will never be much more than a 1/4-turn throttle but in any application requiring less than 50mm of travel, it will be less than 1/4-turn to fully open. If only 25mm of travel is required, it will be about a 1/8-turn throttle. The opposite of the Vortex is our CR Pro; our slowest single pull throttle. It has a rate of 2.93, the result of a maximum of 170º turn and 58mm of travel. The rule of rates is simple; the smaller the value of the rate, the faster the throttle will open the carb.

• Since we do not know the travel of your carb(s) or throttle body(ies), we will not quote a fractional turn. With careful measurement, you can determine the approximate fractional turn required by a given carb and throttle by removing your existing throttle from your existing cable. Carefully measure the exposed inner wire (in millimetres) between the last fitting on the housing (the cap, elbow fitting, or threaded adjuster) and the wire end fitting (usually a ball or barrel). Do not include the wire end fitting in the measurement, only the exposed wire. Write down the measurement, it is your present "throttle free length." Now pull the inner wire until the carb is fully open against the stop and repeat the measurement. Subtract the throttle free length from the measurement you have just taken; this figure is the carb's "travel." Refer to the "rate" of the throttle you are considering. Multiply your carb's "travel" by the "rate" of the throttle. The result is the approximate number of degrees the throttle will turn to fully open the carb(s).

Motion Pro CR Competition Throttle Tube Kit features:

• Die-cast aluminium housing with a black epoxy finish
• Fits 7/8 inch (22mm) bars
• Opens 30-38mm carburettors
• Throttle cable will clear brake master cylinder on handlebar
• Includes throttle tube with grip retaining ring and pop out end
• Early disc-brake Honda CR replacement